TWO-COMPONENT POLYURETHANE PRIMER
Mixture of inorganic pigments and fillers in solution of acrylic resin in organic solvents, hardened with aliphatic polyisocyanate.
CHARACTERISTICS AND USE
The paint TELPUR P 150 is determined for high build prime coats on metal and steel surfaces. Temperature during drying must not decrease under 10 °C, drying can be accelerated at the temperature 60 °C for 30 minutes. The paint is sandable after approximately 4 hours of drying at the temperature 23 °C.
The paint mixes properly with the hardener in specified ratio before use.
Exterior and interior with medium and high corrosive stress, e.g.: chemical plants, industrial zones, coating of traffic devices.
0100 – white, 0110 – grey, 0660 – sandy