LAZUROL TOPDECOR BÁZE S1035

THIN COATING WOOD STAIN WITH MIXTURE OF WAXES BASE

  • Design and protective
  • Enhances beaty of wood
  • Easy renewable stain
Podrobné informace
Kde nakoupit? E-shop Prodejny

The base is designed for mixing centres. Solvent-based wood stain protects and decorates soft and hardwoods exposed to weather conditions, also in interior, especially: planed wood, saw timber, garden furniture, wooden wall panelling and ceilings, fences, cottages and wooden houses, windows, doors. It deeply penetrates wooden structure and provides low built highly effective silk finish. It contains wax, natural oil and colourfast transparent iron oxide pigments. Renovation is very simple.

SURFACE PREPARATION

Wood has to be clean, dry, rubbed down in grain direction and dust off with humidity max 12 %. Excessive resin (larch and pine) has to be stripped by thinner C 6000. Quality and durability of coat depends on wood treatment.
It is recommended to treat the exterior wood against mould, fungi and insects by LAZUROL FUNGICIDAL IMPREGNATION S 1033 or LAZUROL FUNGI. Than surface sands by fine sandpaper, dust off and apply wood stain.
Remove all poorly adhering old coats to the solid surface when renovate.

THINNER S 6006 for washing tools

RECOMMENDED APPLICATION

Properly mix before use. It shouldn´t be thinned, it is ready to use.
Minimum temperature for application is 7 °C. Apply 1-2 coats for interior and 3 coats for exterior use. Recoat after 24 hours. When you wipe surface after 10-15 minutes with dry brush or cloth, beauty of wood is highlighted.
For high gloss surface apply LAZUROL UNIVERSAL VARNISH S 1002 or natural LAZUROL GOLD S 1037. For high durability of floor use LAZUROL FLOOR VARNISH S 1020.

TINTING

Different colour shades are prepared by tinting system BALMIX.

Vydatnost

8-10 m²/l depending on substrate absorbency

Způsob nanášení

  • štětec

Máte problém, se kterým si nevíte rady?
Zkuste naši poradnu!

Na vaše dotazy odpovídáme každý den.
Zeptejte se i vy!