Uniflex putty for plasterboard sandable one-component putty for filling joints between plasterboard boards. The putty is only suitable for interior use. Putty is applied with a spatula or stainless steel trowel. High-quality plasterboard sealant of Czech production.
Application of Uniflex sandable drywall putty:
The substrate must be cleaned and degreased. Loose parts and old coatings must be removed. The putty is in application consistency, just mix before use. We apply the putty with a spatula in the joints between the plasterboard boards and use a stainless steel trowel for the final treatment. Putty is applied in a layer with a thickness of 1-4 mm. After hardening, the surface can be smoothed with a damp sponge or sanded. The putty is suitable for all common interior painting coatings, e.g. REMAL, SUPERMAL, etc.
Thinner:
Water.
Yield:
A 1 m long joint with a width of 15 mm and a depth of 10 mm requires 0.2 - 0.3 kg of sealant.
Appearance and consistency:
A buttery mass without extraneous mechanical impurities, suitable for application, must not run off the trowel.
Drying time:
Depending on the ambient temperature and the applied layer, 30 - 180 minutes.
