The water-based paint increases thermal insulation and prevents condensation, it has great opacity. It uses for painting on: plasters, concrete, wood, chipboards, cement boards, drywalls in interior. It can be also used as topcoat on metal. Wet abrasion resistance class 2 (CSN EN ISO 11998, classification EN 13300)
SURFACE PREPARATION
Smooth all loose, defective paint and thick coatings. Wash the surface to remove dirt, grease and dusty residue. Defects and cracks fill by REMAL SPATULA, acrylic putty uses for bigger one. Dirty spots cover by REMAL STAIN-STOP. The surface, especially absorbent and dusting, penetrates by REMAL, BARLET and SOICRAT penetrating primers. It is easy to paint on dry and smooth surfaces. Temperature of the surface must be above 5 °C.
RECOMMENDED APPLICATION
Mix properly before use. The paint is ready to use, it shouldn´t be thinned. Add max 0.1 L of water (10 %) to 1 KG of the paint for easy painting. Apply 2-3 coats by roller or brush in interval 4 hours between coats. All dirty tools and places clean immediately! Dried paint is difficult to clean!
TINTING
The paint can be tinted by colour pastes: REMAKOL V 3502, REMAL V 3500P.
Content of hazardous substances
Obsahuje 1,2-benzoisothiazol-3(2H)-on, reakční směs: 5-chlor-2-methylisothiazol-3
(2H)-on a 2-methylisothiazol-3(2H)-on (3:1).
| EUH208 | Contains (see dangerous substances). May cause an allergic reaction. |
| H412 | Harmful to aquatic organisms, with long-term effects. |
| P273 | Avoid release to the environment. |
| P501 | Remove the contents/packaging according to the instructions on the product. |
