The water-based interior paint contains grains up to 0.5 mm. It imitates plaster surface and uses for painting on plasters, concrete, drywalls, cement boards, chipboards and restoration plasters in interior. It has exceptional opacity, permeability, durability with whiteness 91 %.
SURFACE PREPARATION
Smooth all loose, defective paint and thick coatings. Wash the surface to remove dirt, grease and dusty residue. Defects and cracks fill by REMAL SPATULA, acrylic putty uses for bigger one. Dirty spots cover by REMAL STAIN-STOP. The surface, especially absorbent and dusting, penetrates by REMAL, BARLET and SOICRAT penetrating primers. It is easy to paint on dry and smooth surfaces. Temperature of the surface must be above 5 °C.
RECOMMENDED APPLICATION
Add max 5 % of water, mix properly and apply 1-2 coats. It applies by brush, roller or spray. Following coats apply when the surface dries thoroughly.
TINTING
The paint can be tinted by colour pastes: REMAKOL V3502, REMAL V3500P.
Content of hazardous substances
1,3,5-tris(2-hydroxyethyl)hexahydro-1,3,5-triazin, 1,2-benzisothiazol-3(2H)-on, reakční směs: 5-chlor-2-methylisothiazol-3(2H)-on a 2-methylisothiazol-3
(2H)-on (3:1), okthilinon (ISO)
(2H)-on, okthilinon (ISO), reakční směs: 5-chlor-2-methylisothiazol-3(2H)-on [číslo
| EUH208 | Contains (see dangerous substances). May cause an allergic reaction. |
| H412 | Harmful to aquatic organisms, with long-term effects. |
| P273 | Avoid release to the environment. |
| P280 | Wear protective gloves/protective clothing/safety glasses/face shield. |
| P501 | Remove the contents/packaging according to the instructions on the product. |
