The water-based interior paint has high whiteness. It has exceptional opacity, permeability and durability with whiteness 93 %. It uses for painting on: plasters, concrete, drywalls, cement boards, chipboards and restoration plasters in interior. Wet abrasion resistance class 5 (CSN EN ISO 11998, classification EN 13300)
SURFACE PREPARATION
Smooth all loose, defective paint and thick coatings. Wash the surface to remove dirt, grease and dusty residue. Defects and cracks fill by REMAL SPATULA, acrylic putty uses for bigger one. Dirty spots cover by REMAL STAIN-STOP. The surface, especially absorbent and dusting, penetrates by REMAL, BARLET and SOICRAT penetrating primers. It is easy to paint on dry and smooth surfaces. Temperature of the surface must be above 5 °C.
RECOMMENDED APPLICATION
Add max 10-20 % of water, mix properly and apply 2 coats. It applies by brush, roller or spray. Following coats apply when the surface dries thoroughly.
TINTING
The paint can be tinted by colour pastes: REMAKOL V 3502, REMAL V 3500P.
Content of hazardous substances
1,3,5-tris(2-hydroxyethyl)hexahydro-1,3,5-triazin, 1,2-benzisothiazol-3(2H)-on, reakční směs: 5-chlor-2-methylisothiazol-3(2H)-on a 2-methylisothiazol-3
(2H)-on (3:1), okthilinon (ISO)
(2H)-on, okthilinon (ISO), reakční směs: 5-chlor-2-methylisothiazol-3(2H)-on [číslo
| EUH208 | Contains (see dangerous substances). May cause an allergic reaction. |
| H412 | Harmful to aquatic organisms, with long-term effects. |
| P273 | Avoid release to the environment. |
| P280 | Wear protective gloves/protective clothing/safety glasses/face shield. |
| P501 | Remove the contents/packaging according to the instructions on the product. |
