The water-based interior paint has high opacity and durability. It is permeable, whiteness 91 %. It uses for painting on: plasters, concrete, drywalls, cement boards, chipboards and restoration plasters in interior. Wet abrasion resistance class 5 (CSN EN ISO 11998, classification EN 13300)
SURFACE PREPARATION
Smooth all loose, defective paint and thick coatings. Wash the surface to remove dirt, grease and dusty residue. Defects and cracks fill by REMAL SPATULA, acrylic putty uses for bigger one. Dirty spots cover by REMAL STAIN-STOP. The surface, especially absorbent and dusting, penetrates by REMAL, BARLET and SOICRAT penetrating primers. It is easy to paint on dry and smooth surfaces. Temperature of the surface must be above 5 °C.
RECOMMENDED APPLICATION
Add max 0.4 L (40 %) of water to 1 KG of the paint for 1st coat and mix properly. 2nd coat with additional max 0.3 L (30 %) of water to 1 KG of the paint. It applies by brush, roller or spray. Following coats apply when the surface dries thoroughly.
TINTING
The paint can be tinted by colour pastes: REMAKOL V3502, REMAL V3500P and in systems: TELURMIX, RAINBOW.
