The enamel is especially intended for the top coats of warm-water heating systems. The paint is highly white, yellowing doesn´t occur till 130 °C. It has proper opacity and spreading rate, the coat dries quickly. It doesn´t contain aromatic compounds. Before the application, the radiators should be cooled down.
BENEFITS
• heat resistance
• yellow resistance, brilliant whiteness
• no content of aromatics
SURFACE PREPARATION
The metal substrate must be clean, dry, degreased, free of rust and dust, mechanically cleaned. Metal substrates must be provided with appropriate anticorrosive primer. The radiators should be cooled down. Formerly coated surfaces must be cleaned, degreased and without old non-adhesive paints.
Thinner: BALTECH S6006 for cleaning tools, BALTECH S6001 for spraying
Spreading capacity: 10 m2 /1 kg or 12 m2 /1 l
WORKFLOW
Properly mix before use. It shouldn´t be thin, it is ready for use. Apply by brush, roller or spraying on prepared surface.
Painting of a central heating system
1. 1x primer PRAGOPRIMER STANDARD S2000, FORMEX ZÁKLAD NA POZINK S2003 or PRAGOPRIMER UNIVERZAL S2035;
2. 1 - 2x special enamel RADBAL PROFI S2120, optimal thickness of one layer is 30 – 35 µm. For a long-term effectivity apply enamel in two thinner layers. Interval between two layers is about 24 hours / 23°C.
SHADES
1000 white
Signal word: Warning
Uhlovodíky, C11-C12, isoalkany < 2 % aromátu.
EUH066 | Repeated exposure may cause skin dryness or cracking. |
---|---|
EUH211 | Attention! Hazardous respirable droplets may form when sprayed. Do not inhale aerosols or mist. |
H226 | Flammable liquid and vapors. |
H413 | May cause long-term harmful effects to aquatic organisms. |
P102 | Keep out of reach of children. |
P210 | Keep away from heat, hot surfaces, sparks, open flames and other sources of ignition. No smoking. |
P280 | Wear protective gloves/protective clothing/safety glasses/face shield. |
P501 | Remove the contents/packaging according to the instructions on the product. |