Universal primer, suitable mainly as a primer under synthetic air drying solvent-based top coats. It has excellent anticorrosive properties, fast drying and universal applicability. It is suitable for absorbent substrates such as wood or masonry as well.
BENEFITS
• active anticorrosive pigment
• quick drying
• excellent adhesion
SURFACE PREPARATION
The surface must be clean, dry, degreased, free of rust and dust, mechanically cleaned. First of all the surface must be degreased by means of suitable agent (e.g. BALTECH P6402 technical benzine, BALTECH P6401 acetone or, if it is possible, warm pressurized water with detergent). For removing of residues of various salts it is necessary then to rinse the surface with clear water. Rough and sticky impurities must be removed manually or mechanically (grinding, scraping). Possible rust may be removed also manually or mechanically (metal brushes, grinding discs). Absorbent surfaces must be treated (penetrated) with suitable agent, providing even absorbency. Formerly coated surfaces must be cleaned, degreased and without old non-adhesive paints.
Thinner: BALTECH S6001 for spraying, BALTECH S6006 for brush or roller
Spreading capacity: 18 - 21 m2/l per one layer
WORKFLOW
Properly mix before use, thin, if it is necessary. Apply by brush, roller or spraying.
The coating of a metal:
First it is necessary to treat the problematic zones (corners, edges, welds, surface defects) by brush.
1. 1x PRAGOPRIMER STANDARD S2000, drying 24 hours. Optimal thickness of one layer is 25 -30 μm. Drying on metal objects can be accelerated by drying up to the temperature of 80 °C;
2. bonding, as necessary i.e. by polyester mastic BKP Rapid TOS;
3. regrinding of the bonded places with a sandpaper No. 180 - 220 while wet;
4. 1x PRAGOPRIMER STANDARD S2000;
5. grinding with a sandpaper No. 280;
6. 2 - 3x INDUSTROL UNIVERZAL S2013, INDUSTROL PLUS S2071 or INDUSTROL UNIMAT S2075.
The coating of an absorbent surface:
1. 1x impregnation with LAZUROL CLASSIC S1023 or LAZUROL FUNGICIDAL IMPREGNATION S1033, drying 24 hours;
2. 1x PRAGOPRIMER STANDARD S2000, drying 24 hours;
3. 2 – 3x INDUSTROL UNIVERZAL S2013, INDUSTROL PLUS S2071 or INDUSTROL UNIMAT S2075. If the bonding is needed, follow the steps from the previous section.
SHADES
0100 white, 0110 grey, 0840 russet
Signal word: Danger
Uhlovodíky, C9 - C12, n-alkany, isoalkany, cyklické, aromáty (2-25%), xylen (smes).
EUH211 | Attention! Hazardous respirable droplets may form when sprayed. Do not inhale aerosols or mist. |
---|---|
H226 | Flammable liquid and vapors. |
H312+H332 | Harmful in contact with skin or by inhalation. |
H315 | It irritates the skin. |
H319 | Causes serious eye irritation. |
H372 | Causes organ damage with prolonged or repeated exposure. |
H411 | Toxic to aquatic organisms, with long-term effects. |
P102 | Keep out of reach of children. |
P210 | Keep away from heat, hot surfaces, sparks, open flames and other sources of ignition. No smoking. |
P261 | Avoid breathing dust/fume/gas/mist/vapour/aerosols. |
P273 | Avoid release to the environment. |
P280 | Wear protective gloves/protective clothing/safety glasses/face shield. |
P304+P340 | IF INHALED: Move the person to fresh air and keep them in a position that facilitates breathing. |
P305+P351+P338 | IF IN EYES: Rinse carefully with water for several minutes. Remove contact lenses, if worn and if they can be removed easily. Continue rinsing. |
P312 | If you feel unwell, call the TOXICOLOGICAL INFORMATION CENTER/doctor/ tel. 224 919 293 or 224 915 402 (24 hours a day) |
P501 | Remove the contents/packaging according to the instructions on the product. |