LAZUROL UNIVERSAL VARNISH S1002, gloss

Universal varnish with glossy surface endowed with excellent mechanical properties.

BENEFITS

• excellent decorative properties
• perfect levellling
• easy application

SURFACE PREPARATION

Before the application, the timber surface shall be clean, dry, well smoothened, with max. 12% humidity and free of resin residues. The timber surface with high content of resins (larch, pine) shall be cleaned of all resin residues, e.g. by washing by BALTECH C6000 nitro-solvent. Quality of wood preparation determines overall look of the wood final finish and affects total lifetime of the coating system.

First it is recommended to treat the timber surface with a suitable impregnation, which ensures uniform absorbency and higher protection of the timber surface of wood (in case of using fungicidal impregnation also protection against attack of mould, fungi and insects. Subsequently it is necessary to lightly abrade a surface by fine sandpaper in the direction of the grain, dust off and apply varnish. The metal surface must be clean, dry, degreased, free of rust and dust, mechanically cleaned. Remove all poorly adhering old coats to the solid surface when renovate (in a case of a total removal of the old paint apply new paint system progressively, including wood impregnation).

Thinner: BALTECH S6006 for washing tools

Spreading capacity: 14 - 17 m²/l on one layer

WORKFLOW

Properly mix before use. Apply on the prepared surface by brush, roller, spraying or dipping. It shouldn´t be thinned, it is ready to use. 
Metal coating
2 or 3 coats of LAZUROL UNIVERSAL VARNISH S1002 in intervals of 24 hours. 

Wood coating
1.    1 coat of LAZUROL CLASSIC S1023 (penetration) or LAZUROL FUNGICIDAL IMPREGNATION S1033;
2.    1 or 2 coats of LAZUROL UNIVERSAL VARNISH S1002. Recoating is possible after 24 hours. Optimum thickness of one layer of coat is 25-30 μm.

GHS02 - flammable substances GHS07 - irritants GHS08 - substances hazardous to health

Signal word: Warning

Uhlovodiky, C9 - C11, n-alkany, isoalkany, cyklické <2% aromátů. Uhlovodiky, C9 - C12, n-alkany, isoalkany, cyklické, aromáty (2-25%).