LAZUROL YACHT VARNISH S1119

TRANSPARENT VARNISH More information
Description
Description

The varnish is intended for decorative coatings of wooden building elements, it is endowed with highly resistant to humidity and water. It is characterised by excellent processability, long-term protection against weather conditions and stabile gloss. The varnish especially highlights the wood's graining. 

BENEFITS

• water and UV resistant
• high gloss 
• enhances natural beauty of wood

SURFACE PREPARATION

Before the application, the timber surface shall be clean, dry, well smoothened, with max. 12% humidity and free of resin residues. The timber surface with high content of resins (larch, pine) shall be cleaned of all resin residues, e.g. by washing by BALTECH C6000 nitro-solvent. Quality of wood preparation determines overall look of the wood final finish and affects total lifetime of the coating system.

First it is recommended to treat the timber surface with a suitable impregnation, which ensures uniform absorbency and higher protection of the timber surface of wood (in case of using fungicidal impregnation also protection against attack of mould, fungi and insects). Subsequently it is necessary to lightly abrade a surface by fine sandpaper in the direction of the grain, dust off and apply varnish.

Remove all poorly adhering old coats to the solid surface when renovate (in a case of a total removal of the old paint apply new paint system progressively, including wood impregnation).

Thinner:  BALTECH S6006, BALTECH S6001 for spraying

Spreading capacity: 14 - 17 m2/l on one layer

WORKFLOW

Properly mix before use. Apply by brush, roller or  spraying on the prepared surface. It shouldn´t be thinned, it is ready to use. 
Wood coating
1.  1x impregnation with LAZUROL CLASSIC S1023 or LAZUROL FUNGICIDAL IMPREGNATION S1033
2.  2 coats of LAZUROL YACHT VARNISH S1119. The second and next coat can be applied after 24  
     hours. Optimal thickness of one coat is 25-30 μm.

Safety notice
GHS02 - flammable substances GHS02 - flammable substances GHS07 - irritants GHS07 - irritants

Signal word: Warning

Content of hazardous substances

Uhlovodíky, C9 - C11, n-alkany, isoalkany, cyklické, < 2 % aromátu. Neodekanoát vápenatý.

EUH066 Repeated exposure may cause skin dryness or cracking.
H226 Flammable liquid and vapors.
H319 Causes serious eye irritation.
H336 May cause drowsiness or dizziness.
P101 If medical attention is needed, have the product packaging or label on hand.
P102 Keep out of reach of children.
P210 Keep away from heat, hot surfaces, sparks, open flames and other sources of ignition. No smoking.
P261 Avoid breathing dust/fume/gas/mist/vapour/aerosols.
P271 Používejte pouze venku nebo v dobře větraných prostorách.
P280 Wear protective gloves/protective clothing/safety glasses/face shield.
P337+P313 If eye irritation persists: Get medical attention/treatment.
P501 Remove the contents/packaging according to the instructions on the product.
Parameters
Producer Skupina BARVY A LAKY
Brand Lazurol
Product list PDF
Documents to download