Solvent-based woodstain is intended to protect soft and hard wood in both interior and exterior. It contains transparent iron oxide pigments. The coating is highly decorative and enhances beauty of wood. It is resistant against humidity and UV radiation. The wood stain doesn´t flow down when applied and it has excellent linking on large surfaces.
BENEFITS
• long-term protection of wood
• stays on vertical surfaces
• highly decorative
SURFACE PREPARATION
Before the application, the timber surface shall be clean, dry, well smoothened, with max. 12% humidity and free of resin residues. The timber surface with high content of resins (larch, pine) shall be cleaned of all resin residues, e.g. by washing by BALTECH C6000 nitro-solvent. Quality of wood preparation determines overall look of the wood final finish and affects total lifetime of the coating system.
First it is recommended to treat the timber surface with a suitable impregnation, which ensures uniform absorbency and higher protection of the timber surface of wood (in case of using fungicidal impregnation also protection against attack of mould, fungi and insects. Subsequently it is necessary to lightly abrade a surface by fine sandpaper in the direction of the grain, dust off and apply woodstain.
The timber surface intended for exterior is recommended to treat with LAZUROL FUNGICIDAL IMPREGNATION S1033, the timber surface intended for interior is recommended to treat with colourless woodstain LAZUROL CLASSIC S1023. Remove all poorly adhering old coats to the solid surface when renovate.
Thinner: BALTECH S6006 for cleaning tools
Spreading capacity: 17 m2/l per single layer according to a timber absorbency
WORKFLOW
Properly mix before use. It shouldn´t be thinned, it is ready to use. Apply 2 or 3 coats on the prepared surface in wood direction. Recoat after 6 hours. Sanding is possible after 24 hours. Colour shades are intermixable. Apply by brush for wood stains with natural fibre, roller for varnishes and wood stains (MOLTOPREN).
SHADES
T000 natural, T020 chestnut, T021 nut, T022 palisandr, T023 teak, T024 cedar, T060 pine, T080 mahagon
TINTING
Product is is also available as a base for the tinting system BALMIX.
EUH066 | Repeated exposure may cause skin dryness or cracking. |
---|---|
P102 | Keep out of reach of children. |
P270 | Při používání tohoto výrobku nejezte, nepijte ani nekuřte. |
P280 | Wear protective gloves/protective clothing/safety glasses/face shield. |
P501 | Remove the contents/packaging according to the instructions on the product. |