LAZUROL CLASSIC S1023

Solvent-based woodstain is intended to protect soft and hard wood in both interior and exterior. It contains natural oil and protects wood against UV radiation. It deeply penetrates wooden structure and enhances natural beauty, provides highly effective coating. The product is characteristic by very easy renewability of an old paint. Colourless woodstain is intended for using in interior only!!

BENEFITS

• excellent protection of soft and hard wood
• excellent penetration into the wooden structure
• enhances natural beauty of wood

SURFACE PREPARATION

Before the application, the timber surface shall be clean, dry, well smoothened, with max. 12% humidity and free of resin residues. The timber surface with high content of resins (larch, pine) shall be cleaned of all resin residues, e.g. by washing by BALTECH C6000 nitro-solvent. Quality of wood preparation determines overall look of the wood final finish and affects total lifetime of the coating system.

First it is recommended to treat the timber surface with a suitable impregnation, which ensures uniform absorbency and higher protection of the timber surface of wood (in case of using fungicidal impregnation also protection against attack of mould, fungi and insects. Subsequently it is necessary to lightly abrade a surface by fine sandpaper in the direction of the grain, dust off and apply woodstain.

Thinner: BALTECH S6006 for cleaning tools

Spreading capacity: 8 - 10 m²/l per single layer according to a timber absorbency

WORKFLOW

Properly mix before use. Apply by brush on the prepared surface. It shouldn´t be thinned, it is ready to use.

Ensure product is thoroughly stirred during the application, otherwise sheen and colour variations may be expected. Apply 1 or 2 coats for interior and 3 coats for exterior use. The colourless woodstain is for interior only. Recoat after 24 hours. It is recommended to wipe surface after 10-15 minutes with dry brush or cloth, beauty of wood is highlighted.

For high gloss finish it is possible to apply LAZUROL UNIVERSAL VARNISH S1002 or LAZUROL GOLD S1037 (natural shade) over the dried LAZUROL CLASSIC S1023. To get high durability of floor it is possible to use LAZUROL FLOOR VARNISH S1020.

SHADES

0000 colourless, 0010 white, 0020 chestnut, 0021 nut, 0022 palisandr, 0023 teak, 0025 sipo, 0051 fir green, 0060 pine, 0062 cembra pine, 0080 mahogany, 0099 ebony

Uhlovodíky, C10-C13, n-alkany, isoalkany, cyklické, < 2 % aromátu.