Very fine creamy putty for repairing cracks, defects, grooves in wood, chipboard and fiberboard. The putty can be used for both interior and exterior applications, as well as for possible repair of masonry, plasterboard, etc. Application from 0.5mm - 4mm. Exteriors are recommended to be coated immediately. Sandable and paintable.
Instructions for use:
Work surfaces must be clean, free of old paint and grease. Putty is applied with a spatula or trowel. After the putty has hardened, we sand with sandpaper and then work on any ordinary wood. Sealing is carried out from 0.5 mm to 3 mm in one layer.
Notice from the point of view of occupational safety and first aid:
In case of inhalation - Remove victim to fresh air and keep calm. If irritation persists, seek medical attention/treatment.
In case of skin contact - Remove contaminated clothing, wash affected skin with water and soap, or treat with repair cream. Seek medical attention/treatment if symptoms persist.
In case of eye contact - Carefully flush the affected eye with plenty of clean water for several minutes, remove contact lenses if worn and if they can be removed easily. If eye irritation persists, seek medical attention/treatment.
In case of ingestion - Rinse the mouth thoroughly with a large amount of water, in case of ingestion of a large amount and/or in cases of uncertainty or difficulties, seek medical help/treatment.
