Metals | Industrial coatings | Products

TELKYD T330

SYNTHETIC ENAMEL. Very good environmental resistance. Universal applicability. Quick drying. Suitable for the tinting system HOSTEMIX.

TELKYD S201

ANTICORROSIVE GLOSSY SINGLE COAT. Excellent adhesion to steel surfaces. 2-in-1 coating material for economical work. Suitable for tinting system HOSTEMIX.

TELPUR T340 HS

TWO-COMPONENT POLYURETHANE HIGH-SOLID ANTICORROSIVE ENAMEL. High-solid paint, high spreading capacity. High gloss. Suitable for the tinting system HOSTEMIX.

TELPUR P180

TWO-COMPONENT POLYURETHANE ANTICORROSIVE PRIMER. Excellent adhesion to steel surfaces. Excellent sandability. It stays on vertical surfaces.

TELKYD P160

ANTICORROSIVE PRIMER. Excellent adhesion to steel surfaces. Suitable under 2K PUR and 2K POX coatings. It does not affect the degree of gloss of topcoats.

TELPUR C100 AG

ANTI-GRAFFITI TWO-COMPONENT POLYURETHANE VARNISH. Excellent weather resistance. High gloss. Possibility of repeated cleaning, without the need of application after each cleaning.

TELKYD T300

SYNTHETIC ENAMEL. Very good environmental resistance. Universal applicability. Quick drying. Suitable for the tinting system HOSTEMIX.

TWO-COMPONENT EPOXY ANTICORROSIVE PRIMER HIGH-BUILT. Excellent adhesion to steel and aluminium surfaces. Tolerant to worse surface preparation. Excellent anticorrosive properties. Because of low content of solvents suitable for repainting of old coats. Suitable for direct food contact (selected shades). Suitable for the tinting system HOSTEMIX.

TELHARD PUR

HARDENER FOR POLYURETHANE PAINTS TELPUR

TELPOX P170

TWO-COMPONENT EPOXY ANTICORROSIVE PRIMER HIGH-BUILT. Excellent adhesion to steel. Excellent anticorrosive properties. During the curing process minimum change of the volume Suitable for the tinting system HOSTEMIX.

TELHARD POX RAPID 2

HARDENER FOR EPOXY PAINTS TELPOX

TELKYD T370

SPECIAL HEAT RESISTANT ENAMEL. Very good environmental resistance. Long-term heat resistance up to 250 °C. Short-term heat resistance up to 350 °C.

TELPUR S210 E

TWO-COMPONENT POLYURETHANE ANTICORROSIVE SINGLE COAT. Excellent adhesion to steel. Quick drying. Paint 2 in 1 for cost-saving work.

TELSIL S500

ANTICORROSIVE HEAT RESISTANT BAKING PAINT.

TELPUR T300

TWO-COMPONENT POLYURETHANE ENAMEL. Excellent weather resistance. Chemical resistance and colour stability. Suitable for the tinting system HOSTEMIX.

TELPUR T330 HS

TWO-COMPONENT POLYURETHANE HIGH-SOLID ANTICORROSIVE SINGLE COAT. High-solid paint, high spreading capacity. Good chemical and mechanical resistance. Suitable for the tinting system HOSTEMIX. TELPUR T330 HS is suitable for direct food contact (selected shades).