INDUSTROL UNIVERZÁL S2013

Solvent-based enamel uses for coating of metal, wood and masonry, both exterior and interior, especially: metalconstructions, fences, doors, door frames, parapets, wooden furniture and panelling, garden furniture. The product is characteristic with an excellent hiding power, high gloss and very good weathering resistance. It is manufactured in a wide range of both RAL and BAL shades and according to the individual customer demands. The product has a long-term storability, during which there are not occurring any changes in the painting matter properties. 

SURFACE PREPARATION

The timber surface must be clean, dry, well worn, moisture max. 12%, without rest of any resins. Concrete or masonry substrate must be dry, compact, clean, well-matured (usually 4-6 weeks) and insulated against ground (bottom) moisture. The metal substrate must be clean, dry, degreased, free of rust and dust, mechanically cleaned. Absorbent substrates must also be treated with a suitable impregnant and provided with a suitable base coat. Metal substrates must be provided with appropriate anticorrosive primer. Formerly coated surfaces must be cleaned, degreased and without old non-adhesive paints.

Thinner: BALTECH S6001 for spraying, BALTECH S6006 for brush or roller

Spreading capacity: 14 - 16 m²/l per one layer

WORKFLOW

Properly mix before use, thin, if it is necessary.
The coating of a metal:
1.    1x PRAGOPRIMER STANDARD S2000, FORMEX FOR GALVANIZED IRON S2003, PRAGOPRIMER EXTRA S2035 or PRAGOPRIMER PROFI S2129; 
2.    local bonding i.e. BKP Rapid, regrind bonded area with a sandpaper;
3.    1x PRAGOPRIMER STANDARD S2000, FORMEX FOR GALVANIZED IRON S2003, PRAGOPRIMER EXTRA S2035 or PRAGOPRIMER PROFI S2129;
4.    grinding with a sandpaper No. 280-320 while wet;
5.    2 – 3x INDUSTROL UNIVERZAL S2013 enamel. Optimal thickness of a single layer is 30-35 m.

The coating of a wood:
1.    1x impregnate with LAZUROL CLASSIC S1023 or LAZUROL FUNGICIDAL IMPREGNATION S1033, drying for 24 hours
2.    1 - 2x PRAGOPRIMER PLUS S2070 or LAZUROL OKNOBAL PRIMER S2060
3.    2 - 3x INDUSTROL UNIVERZAL S2013 enamel. Time interval between particular layers is at least 24 hours (20 °C). Optimal thickness of a single layer is 30-35 m.    
 

GHS02 - flammable substances GHS07 - irritants GHS08 - substances hazardous to health

Signal word: Warning

xylen ( směs ), uhlovodíky, C9 - C12, n-alkany, isoalkany, cyklické, aromáty (2 - 25%)