The solvent-based anticorrosive semi-glossy single coat combines primer, barrier and topcoat. It is designed for direct coating on metal, steel and oxidized galvanized surfaces, especially: roofs, metal constructions, columns, fences, both exterior and interior. It can be also used for porous materials as wood and chipboards after previous penetration.
SURFACE PREPARATION
The surface has to be clean, dry and free of grease, rust and dust. Degrease by BALTECH C6000, BALTECH P6401 Acetone or hot water with detergent. Salt residue rinse with water. Defective or poorly adhering impurities remove by grinding or scraping, thoroughly remove rust (metal brush, grindstone, rust remover). Rust remover rinse by water.
Porous materials impregnate for uniform absorbency of the surface.
Previously painted surfaces clean, degrease and remove all poorly adhering old coats to the solid surface when renovate. Verify compatibility between old paint and new one. Perform a test on the area 1 m2.
THINNER BALTECH S6006
RECOMMENDED APPLICATION
- Mix properly before use. It shouldn´t be thinned, it is ready to use.
- Apply 2-3 coats according needs, more than 8 hours between coats. Optimal film thickness of one coat is 30-40 µm.
Coverage
10-13 m2/l in one coat
