HOSTAGRUND 2in1 FOR IRON S2160

THIXOTROPPIC SINGLE COAT FOR IRON More information
Description
Description

The product is intended for anticorrosive single coats of steel structures, e.g. masts, bridges, undercarriages and fences. It is suitable for oxidized galvanized steel as well and also for absorbent substrates such as wood or masonry. The product is characteristic by an excellent adhesion to steel surfaces and by very quick drying even in thick layers. The thixotropic character allows to applicate the paint in very thick layers; by airless spraying it is possible to dash up to 300 µm of a wet film in a single step. The coating film has a silk matt surface. It is produced in a wide range of shades (for wholesalers also in RAL shades).

BENEFITS

• direct to rust
• it stays on vertical surfaces
• paint 2 in 1 for cost-saving work 

SURFACE PREPARATION

The surface must be clean, dry, degreased, free of rust and dust, mechanically cleaned. First of all, the surface must be degreased by means of suitable agent (e.g. BALTECH P6402 Technical benzine, BALTECH P6401 Acetone or, if it is possible, warm pressurized water with detergent). For removing of residues of various salts it is necessary then to rinse the surface with clear water. Rough and sticky impurities must be removed manually or mechanically (grinding, scraping). Possible rust may be removed also manually or mechanically (metal brushes, grinding discs). Absorbent bases must be treated (penetrated) with suitable agent, providing even absorbency. Formerly coated surfaces must be cleaned, degreased and without old non-adhesive paints.

Thinner: BALTECH S6005 for cleaning tools

Spreading capacity: ca 4.5 m2/l per one layer

WORKFLOW

Properly stir before use, thin, if it is necessary. Stirring disrupts the gel and the product becomes slightly liquid.
Airless spraying: 
Apply 1 x coat of HOSTAGRUND S2160 in the way to get the final thickness of dry paint film at least 100 µm.
Brush:
Apply 1 or 2 coats of HOSTAGRUND S2160 in the way to get the final thickness of dry paint film at least 100 µm. If it is   necessary, apply the next coats after 4 hours (soonest after 24 hours).

SHADES

0100 - white, 0101 – light grey, 0110 – medium grey, 0199 - black, 0243 - brown, 0280 - palisander, 0440 – light blue, 0455 – dark blue, 0514 – light green, 0530 – medium green, 0540 – dark green, 0620 – medium yellow, 0840 – russet, 0910 - aluminium, 6200 – gasworks yellow

Safety notice
GHS02 - flammable substances GHS02 - flammable substances GHS07 - irritants GHS07 - irritants GHS08 - substances hazardous to health GHS08 - substances hazardous to health GHS09 - substances hazardous to the environment GHS09 - substances hazardous to the environment

Signal word: Warning

Content of hazardous substances

Obsahuje: xylen ( směs ), uhlovodíky, C9 - C12, n-alkany, isoalkany, cyklické, aromáty (2 - 25%)

H226 Flammable liquid and vapors.
H312+H332 Harmful in contact with skin or by inhalation.
H315 It irritates the skin.
H319 Causes serious eye irritation.
H373 May cause organ damage through prolonged or repeated exposure.
H411 Toxic to aquatic organisms, with long-term effects.
P102 Keep out of reach of children.
P210 Keep away from heat, hot surfaces, sparks, open flames and other sources of ignition. No smoking.
P261 Avoid breathing dust/fume/gas/mist/vapour/aerosols.
P273 Avoid release to the environment.
P280 Wear protective gloves/protective clothing/safety glasses/face shield.
P304+P340 IF INHALED: Move the person to fresh air and keep them in a position that facilitates breathing.
P305+P351+P310 IF IN EYES: Rinse carefully with water for several minutes. Remove contact lenses, if worn and if they can be removed easily. Continue rinsing.
P312 If you feel unwell, call the TOXICOLOGICAL INFORMATION CENTER/doctor/ tel. 224 919 293 or 224 915 402 (24 hours a day)
P501 Remove the contents/packaging according to the instructions on the product.
Parameters
Producer Skupina BARVY A LAKY
Brand Hostagrund
Product list PDF
Documents to download