EPOLEX TOPCOAT S2321

The product is intended for use as a glossy top coat of wood, metal, walling, some plastics etc. A dried out coat is resistant to water, moisture, various chemicals (alkalis, in particular), oils, fuels and many solvents. It is heat resistant up to the temperature of 120 °C. Due to weather effects paint has a tendency to chalking and loss of gloss. The paint can be grinded and polished with paste, polisher. Before use the paint is mixed properly with the hardener in specified ratio.

BENEFITS

• very good chemical and mechanical resistance
• high gloss
• suitable for direct food contact

SURFACE PREPARATION

Before the application, the timber surface shall be clean, dry, well smoothened, with max. 12% humidity and free of resin residues. Concrete or masonry substrate must be dry, compact, clean, well-matured (usually 4-6 weeks) and structurally insulated against ground (bottom) moisture. Metal surface must be clean, dry, degreased, free of rust and dust, mechanically cleaned. Absorbent bases must be treated (impregnated) with suitable agent, providing even absorbency and provided by proper primer Metal substrates must be provided by a proper anticorrosive primer. Formerly coated surfaces must be cleaned, degreased and without old non-adhesive paints.

Thinner: BALTECH S6300
Hardener: EPOLEX S7300

Mixing ratio: 
100 weight parts EPOLEX S2321 : 33 weight parts EPOLEX S7300                     
70 volume parts EPOLEX S2321 : 30 volume parts EPOLEX S7300                     
The pot life of the hardened mixture is 8 hours (20 °C). 

WORKFLOW

Properly mix before use. Mix with hardener EPOLEX S7300 in prescribed ratio and properly mix together. Apply by brush, roller or  spraying on the prepared surface. 
The coating of a metal:
1.    1x EPOLEX PRIMER S2300. The second coat should be applied not sooner than after 24 hours (20 °C). Drying and maturing of coat can be accelerated by drying at the temperature 60 – 100 °C during 60 – 30 minutes. 
2.    1 - 2x EPOLEX TOPCOAT S2321. The second coat should be applied not sooner than after 24 hours.  Drying may be accelerated by curing at 60°C - 100°C for 60 – 30 minutes.

SHADES

1000 white

GHS02 - flammable substances GHS05 - corrosive and caustic substances GHS07 - irritants GHS08 - substances hazardous to health GHS09 - substances hazardous to the environment

Signal word: Danger

Xylen (smes), butan-1-ol , Uhlovodíky, C9, aromatické , Epoxidová pryskyrice z Bisfenolu A a epichlorhydrinu.