EPOLEX epoxy resin 1200/371 + Epolex P11 hardener, 500 g

For the preparation of adhesive compositions, putties and putty. For bonding metal, glass, ceramics, porcelain, wood, concrete, etc. Before application, the composition must not be diluted by the addition of any thinner or solvent! Contains epoxy resin.

Instructions for use:
The resin is perfectly mixed with the hardener in the weight ratio: 100 wt. part resin 1200 : 6.5 wt. part of the hardener. The mixture is applied to a dry, clean, degreased and possibly sanded surface. Observe the mixing ratio and do not prepare a larger amount of mixture than you can process within 30 minutes. at a temperature of 15-20 °C. Apply the prepared resin to the glued surfaces and then glue them together so that they fit well along the entire length and fix the joint (with a pressure of about 0.02 MPa).

Curing:
It cures at normal or elevated temperature up to 60°C. Curing of the resin takes place within 48 hours

Thinner for washing tools:
Acetone, toluene

GHS05 - corrosive and caustic substances GHS07 - irritants GHS09 - substances hazardous to the environment

Signal word: Danger

epoxidová pryskyřice (průměrná početní molekulová hmotnost ≤ 700). Tvrdidlo obsahuje triethylenteramin (Index: 612-059-00-5; CAS: 112-24-3)-