They are used for final external and internal decorative surface treatment of objects. They come in 1.5 mm and 2 mm.
Properties of acrylic pasty plaster:
Acrylic
Grooved plaster
1.5 and 2 mm grit
Increased protection against fungi and algae
Weather resistant
Stability of color shades, decorative appearance
The variant labeled winter is for application in low temperatures up to 5-12 °C
Preparation of documents:
The substrate must be dry, solid, mature, free of dust and old coatings, e.g. stucco plaster or screed material of the insulation system. Apply the base coat with BARLET PRIMER COAT FOR DECORATIVE PLASTER colored to match the shade of the plaster.
Recommended workflow:
Before applying the plaster, mix thoroughly but without whipping with a slow-moving mixer. You can adjust the consistency of the plaster with a small amount of clean water. Apply the plaster evenly and without interruption with a stainless steel trowel in a layer of the given grain size. After a short drying, adjust the surface of the plaster to the desired structure with a plastic trowel. At higher temperatures above 25 °C, the plaster dries faster, consider the correct creation of the structure and connections. At lower temperatures of 5 to 12 °C and high humidity, use plaster marked Z. At temperatures below 5 °C, plaster cannot be applied. Protect the applied plaster from rain while it dries. Cover the surrounding areas, dried plaster remains are difficult to remove. Use the product from one batch for complete surfaces, mix different batches together before use!
Consumption:
With a grain size of 1.5 mm consumption 2.1 - 2.3 kg/m²
With a grain size of 2 mm consumption 2.3 - 2.5 kg/m²
