BAKRYLEX universal gloss dispersion varnish for wood, colorless V1302
-
GHS02 - flammable substances 
GHS05 - corrosive and caustic substances 
GHS07 - irritants
PRODUCT
The water-based varnish uses on hard and soft woods, especially: furniture, wooden panelling, plywood in interior. It is possible to use it as clear coat on acrylic enamels.
SURFACE PREPARATION
The surface has to be cleaned, rid of grease, dust and loose old coats. Excessive resin has to be stripped. Smooth in grain direction and dust off. The surface impregnates by the varnish thinned with water in ratio 1: 1 or impregnating primer: REMAL, BARLET or SOICRAT. Then it smoothes by sandpaper no. 400-600 after drying at least 4 hours.
RECOMMENDED APPLICATION
Mix properly before use. It shouldn´t be thinned. Apply 2-3 coats. When applies on acrylic coat, the surface slightly smoothes and dusts off (without impregnation), apply 1-2 coats. The surface smoothes with sandpaper no. 400-600, when spraying after 4 hours and apply another coat. The temperature needs to be above 10 °C. Apply by brush, roller or spray.
GHS02 - flammable substances GHS05 - corrosive and caustic substances GHS07 - irritants Signal word: Danger
| H272 | Může zesílit požár; oxidant. |
|---|---|
| H302 | Harmful if swallowed. |
| H318 | Causes serious eye damage. |
| P101 | If medical attention is needed, have the product packaging or label on hand. |
| P102 | Keep out of reach of children. |
| P210 | Keep away from heat, hot surfaces, sparks, open flames and other sources of ignition. No smoking. |
| Producer | Skupina BARVY A LAKY |
|---|---|
| Brand | Bakrylex |
| Product list |